+30 2810 237502 โพ
1-Flute Acrylic Bit for Clean CNC Router Cuts
A single-flute cutter built for clean, melt-free edges on acrylic sheet on a CNC router. Its one cutting edge clears chips fast, keeping the material cool and the finish clear. Suited to signage, displays, and acrylic panel work where edge quality matters.
Select options This product has multiple variants. The options may be chosen on the product page
3-Flute Aluminium End Mills for CNC Router Milling
Three-edged milling cutters for aluminium on CNC routers, available in 4mm, 6mm and 8mm. The three flutes clear chips faster than a two-flute tool, so the feed rate can rise without loading the edge. Suited to extrusion, plate and sheet rather than wood or plastic.
Select options This product has multiple variants. The options may be chosen on the product page
AMB Elektrik Collets for Routers โ 3, 3.175, 4, 6, 8mm
The Kress collet chuck 8mm clamps 8mm-shank cutting tools inside AMB-Elektrik (Kress) router spindles. It gives even, centred clamping pressure so the tool runs true instead of wobbling in the cut.
Select options This product has multiple variants. The options may be chosen on the product page
Compression Router Bit, 2-Flute Up-Down for Wood
A two-flute compression router bit with combined up-cut and down-cut sections for clean edges on both faces of a panel. Suited to MDF, plywood, chipboard and melamine-faced board on CNC routers, cutting grooves, profiles and full through-cuts without extra sanding.
Select options This product has multiple variants. The options may be chosen on the product page
ER11 Collets 1-7mm for CNC Router Spindle Tool Clamping
ER11 collets clamp a cutting tool's shank inside the spindle's ER11 nut, giving even, centred grip on shanks from 1mm to 7mm. They are the standard tool-holding format on small and mid-size CNC routers and engraving machines, and the correct size must be matched to the shank in use.
Select options This product has multiple variants. The options may be chosen on the product page
ER16 Collets for CNC Spindle Tool Clamping, 1-10mm
ER16 collets clamp cutting tool shanks from 1mm to 10mm inside CNC spindles fitted with an ER16 taper. Each size grips one specific diameter, so choosing the correct collet keeps runout low and the tool centred.
Select options This product has multiple variants. The options may be chosen on the product page
ER20 Collets – Precision Clamping 1mm to 13mm
ER20 collets clamp tool shanks from 1mm to 13mm inside ER20 spindles and chucks. Each size grips one diameter for centred, chatter-free holding, letting a single nut cover drills, end mills, and engraving cutters.
Select options This product has multiple variants. The options may be chosen on the product page
ER25 Collet Set 1-16mm for CNC Router Tooling
The ER25 collet set clamps round-shank cutters from 1mm to 16mm in diameter, with each collet sized 28mm OD x 34mm long to fit standard ER25 nuts and holders. It gives CNC routers and milling spindles secure, low-runout tool holding across a wide range of cutter sizes.
Select options This product has multiple variants. The options may be chosen on the product page
Lathe Knurling Tool for Ridged Surfaces โ 0.5 & 1mm Wheels
The P-37082 lathe knurling tool presses a ridged, non-slip texture into cylindrical metal parts such as handles, knobs and shafts. It mounts in the tool post and works entirely by pressure, without removing material. A compact, low-cost accessory for workshops that regularly need a knurled finish.
Select options This product has multiple variants. The options may be chosen on the product page
Straight Wood Router Bits for CNC โ 3.175, 4, 6, 7, 8, 9, 10 mm
Carbide straight wood router bits for CNC routers, built for clean, flat-bottomed cuts in solid timber, plywood and MDF. Suited to grooves, rebates and through-cuts where both faces of the panel need to stay clean.
Select options This product has multiple variants. The options may be chosen on the product page
Tapered Ball Nose Bits for CNC Router Finishing
Tapered ball nose bits combine a conical body with a rounded tip for the final finishing pass on 3D CNC work. Their shape resists flex better than straight ball nose bits, making deeper relief and mould work possible with less risk of breakage.
Select options This product has multiple variants. The options may be chosen on the product page
V-Groove Engraving Bits for CNC Router โ 30ยฐ, 45ยฐ, 60ยฐ, 90ยฐ, 120ยฐ
A conical V groove engraving bit for CNC routers, supplied in cutting angles from 15ยฐ to 90ยฐ. Produces variable-width lines controlled by plunge depth, suited to lettering, logos and decorative grooves in wood, acrylic and composite panels.
Select options This product has multiple variants. The options may be chosen on the product page
