NBT30 Tool Fork for Automatic Tool Changers

Tool fork for NBT30 and BT30 holders. This is the part that keeps the toolholder seated in the magazine of a machining centre with an automatic tool changer. The taper clips into the V, the metal spring retains it, and the spindle pulls it out when the program calls for it.

Where it goes

In a carousel or linear magazine, one fork per tool station. It bolts on with two screws and is shimmed so the taper sits at spindle height.

Specifications

• For NBT30 / BT30 tapers
• Plastic body with metal retaining spring
• Two mounting holes with metal bushings